 AudioJoG Pro 5
Features:
There are 2 rows of 6 LED's corresponding to each ofthe possible connector pins and one for the screen (or ground) connection. Aseach pin is activated, the LED's indicate all connections associated with thatpin, so that short, open and crossed circuits can be easily found. The LED'salso show the possibility of high resistance or leakage connections.
Connectors:
3 Pole XLR Maleand Female
5 Pole XLR Maleand Female
6.35mm Jack,stereo or mono
Single or Twin4.4mm Bantam, stereo or mono
3.5mm Jack,stereo or mono
2/4 PoleSpeakon
DIN 180o 3 & 5 Pole
RCA Phono
BNC 50/75W /HD SDI
Memory:
There are 3 LED's indicating the state of the MEMORYoption.
If the MEMORY LED is on, then AudioJoG Pro 5 automaticallyscans all the connections and compares against information held with just onepress of the test button.
MEMORY works in singleand double ended test modes.
INTERMITTENT fault detection uses the memory tocontinuously test the cable until a fault is found.
Test Modes:
Double ended - both ends of the cable under test areplugged into AudioJoG Pro
Singleended - one end of the cable under test is plugged into AudioJoG Pro 5 theother into another AudioJoG Pro 5 or any other compatible AudioJoG tester.
Specification,Double {Single} ended:
Continuityand Short Circuits, less than 255K {75K} ohms
OpenCircuits (end to end and between connected pins), greater than 255K {75K} ohms
Lessthan 2 {5} second test time
L197mm W 110mm D 50mm
Uses 9v PP3 battery (not supplied)
Click to download Manual
Click to download Leaflet
|
